When we left our old home we made sure we had keys for every lock around the place and we pointed the new owners in the direction of our key hanger so they would know, without a doubt, what they needed to get in and out of various gates and structures.
However, that is not always the case for some land or business owners.
By experience, we can tell you there is nothing more frustrating than buying a new property, discovering a few doors have been padlocked, yet no keys or combinations have been left behind. How did the original owner think you were going to get inside?
Other than a handy pal with a bolt cutter, a new remedy has been found! Go over to the next page and see how using a nut wrench will open a lock in two seconds!
Next Page »
Pages: 1 2
Yeah… Make sure you don’t have any fingers between the end of the wrenches, cuz when it finally snaps, you’re gonna smash anything that’s between them, including bones…
You could pick it. Padlocks are very easy! Then you can reuse the lock
Piece of soda can works also.
All those locks had brass bodies…try that with a steel lock, then I’ll be impressed………….
WTF is a ‘Nut wrench’??? Don’t all wrenches work on a nut by default? ??
99 cent store lock try it on a master lock and on a latch.
Great, show everybody how to break into my stuff.
what in the hell is a piece of soda?
I want to see him do that to a Master lock!
Try doing that with something tougher than a luggage lock.
*Two end wrenches
^^^^^ what you should have posted
Braxton Patterson still need this for your shed?
Exactly what I was thinking. Idiots
Why not just take out the screws?
soda can, pop can, carbonated beverage can,
Or, how to open a cheap brass lock….. this wouldn’t work on a real lock
Doesn’t work with steel locks only cheap brass and aluminum.
I doubt that works on is steel lock
Let’s see that on a steel lock…
https://youtu.be/62Yp6xXp7Po
i can brake tgose trash locks with my pinky
Yes
Make sure you find the shittiest quality lock known to man before trying this.
Yeah that only works on the cheap brass locks.
Only works on cheap locks
Nice!
Cool. But it wasn’t a master lock.
Thanks for showing the criminals how to do it. As if we dont have enough problems, you have to pass on some extra skills as well. Dumb fools
Thomas Bagley
Haha “nut wrench”
A “nut wrench”….?
Doesn’t work… I might work on your daughter’s teeth Journal/diary lock. Lol
A “nut wrench”…wtf?
I did it on a Master combination lock before
That’s where the danger to your fingers is, if it’s a tough lock.
Im pretty sure even children can break padlocks.
How about a hammer? Dont have one? How about a rock? If you have any common sense, a padlock is no obstacle.
Most criminals use a pry bar.
Need some flat nose pliers for this trick as well..
Been using this method for years
Great skill. If you ever want to break in to someone’s luggage.
Scott LA Rock
Doesn’t work on a Nokia lock, unless is Chuck Norris the man with the wrenches.
Now just do that to a master lock… Good luck
Do you mean “box end wrenches”? It sounds weird to say “nut wrench”?
I 2nd Andre van Wyk
Locks only keep honest people out anyhow.
Matthias Zach
Master locks are not good locks
Title should read “how to break open trinket locks”
That wont work on my carbide locks. These dent the teeth of bolt cutters and wont even leave nic on the lock.