Step By Step Guide To Tree Stump Removal

If the process is taking you longer than a few weeks, don't worry. Keep being a smart survivalist who is living a self-sufficient lifestyle. After you learn the necessary steps it will take to get rid of the stump, before you know it, it will be gone. These steps will also prepare you for natural disasters and other life-threatening events.

Drill The Stump Full of Holes

Cut off as much of the top of the stump as possible. Using a 1-in. spade bit with a spade bit extension, drill 1-in. holes around the perimeter of the stump about 12 in. deep and 3 to 4 in. back from the edge. Drill more holes 3 to 4 in. down from the rim at a 45-degree angle to connect with the other holes. They'll provide vent holes for burning or help the rotting process.

You simply pour the granules into drilled holes and fill the holes with water. The stump will become pretty spongy after four to six weeks. Keep kids and pets away. Then you can break out the rotten wood with an ax.

Get Rid of The Stump With Fire

For a completely labor-free removal, the manufacturers of stump remover suggest burning out what's left of the stump by pouring kerosene or fuel oil (never gasoline) into the holes. Wait until the liquid completely penetrates the wood (this could take a few weeks). Then drop a match into the holes to start the burning process. The stump will smolder for days, eventually leaving a charcoal-filled hole. It's dangerous having a giant, smoldering ember in your yard, so some precautions are in order. Envelop the stump in chicken wire, remove all leaves from the vicinity before ignition and keep an eye on it!

We appreciate these outlined steps from The Family Handyman. Remember that a freshly cut tree cannot be removed with a stump remover, which is why cutting it down with an ax after you've followed the above steps is more effective.

While you're out in the wilderness continue to learn skills to make you a prepared survivalist who can tackle any crisis moment.


*

*

Top