This awesome Wide Paracord Bracelet would make a fashion statement as well as possesses practical uses if you were facing a survival situation.

The numbered instructions are a big help to and make the assembly go much easier.

For your side release buckle I recommend a 1″ size. The color you want as the outside one should be your wrist measurement times 12. You should make 2 lengths of this. The color you have for the inside will be twice as long as the outside color.

Loop the strands onto your buckle using a cow hitch knot.

1. Take cord 4 and go under cord 5 and over the standing end of cord 6.

2. You are then going to take cord 6 and go over 5 and then under the standing end of cord 4.

Tighten the half knotup to the base of the previous knots.

3. Now take cord 4 under 5 and over 6.

4. Now take cord 6 and go over 5 and under the standing end of 4.

5. Now to start on the other side.

Take cord 3 and go under 2 and over 1.

6. Take cord 1 and go over 2 and under the standing end of 3.

7. Now take cord 3 and go under 2 and over 1.

8. Take cord 1 and go over2 and under the standing end of 3.

9. You are now going to cross cord 4 over the top of cord 3.

Repeat until you get the desired length.

Attaching the other buckle.

What I do is use a cow hitch with cords 2 and 5 onto the bracelet and then as I am knotting the rest of the bracelet these ends are doubled back on themselves and knotted.

One tip is to remember to tighten every loop as much as possible as you work through each layers – that makes it lie flatter and tighter as well as makes it easier to loop.

For more information on this amazing looking Wide Paracord Bracelet, please visit Instructables. They have awesome tutorials and DIY projects!